Best Internet Plans

Note: This blog information is applicable for India only.

Our biggest problem is which internet connection is best and which one can take for our home or office ?
So here is the solution for this question.

If you are new subscriber and you have to visit all internet provider site's from search engine so here i give you some best company's broadband internet plans link and also give's  link of some company's plan. By this you can easily search and chose best broadband internet plan for your home or office. So here i suggest you some great plans as per my own opinion.

So best company as per my opinion I list out some company's name.(company's rank as per my opinion)

                                       1.) Reliance

             

                                      2.) BSNL 

   
                                           3.) TIKONA   

4.) TATA DOCOMO 

(for Gujarat,India only) 

  
                    5.) AIRTEL   

                       6.) DEN

   

According to me Reliance is the best option for home user and 1 Mbps plan is more preferable. Because for home 1 Mbps is more then enough and its cost is also best rather then other's. Best part of Reliance is that there is no limit of data usage unlimited surfing and downloading.

How to take screen shot in Lava XOLO A800 ?

Hello friends here i show the trick to take screenshot in LAVA XOLO A800 model. There are too many tricks to take screenshot in this divice but here I show one of trick to take screenshot.
Here is the model's photo

       So shown trick is mostly common method to take screenshot in many divices. Here i gave a link which led you to the trick or method to take screenshot in this divice.
Click into given link to show steps - http://bhavikbhansali.wordpress.com/2014/04/13/how-to-take- screenshot-in-xolo-a800/

 hope you know the steps to take screenshot in this divice.
Thank you for visit this site and hope you visit it and know how to take screeshot.

O-LED (organic light emitting diode)

Basic of O-LED :            

  An O-LED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound which emits light in response to an electric current. This layer of organic semiconductor is situated between two electrodes. Generally, at least one of these electrodes is transparent. OLEDs are used to create digital displays in devices such as television  screens, computer monitors, portable systems such as mobile phones, handheld games consoles and PDAs. A major area of research is the development of white OLED devices for use in solid-state lighting applications.

There are two main families of OLED: those based on small molecules and those employing polymers. Adding mobile ions to an OLED creates a light-emitting electrochemical cell or LEC, which has a slightly different mode of operation. OLED displays can use eitherpassive-matrix (PMOLED) or active-matrix addressing schemes. Active-matrix OLEDs (AMOLED) require a thin-film transistor backplane to switch each individual pixel on or off, but allow for higher resolution and larger display sizes.

An OLED display works without a backlight. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD). In low ambient light conditions such as a dark room an OLED screen can achieve a higher contrast ratio than an LCD, whether the LCD uses cold cathode fluorescent lamps or LED backlight.     

To know more about O-LED click on this link : More about O-LED

Basic of Robotics.

Hello friends,
                     I BHAVIK BHANSALI student of  engineering first year in electronic and communication. Today i want to share some basic things required for creating a wired robot for rob-war.
                       
                     First you have to clear that how much dimension are allowed by your competition's comity,
which armor are allowed , maximum voltage to use , if they specify arena you have to clear with that , maximum weight of robot is define or not etc.
                       
                     so first of all you have to chose that which armor are there in your robowar's robot. you have to fix your bot's weight and dimation in which your armor are fit properly and work properly. make your bot design and it's a flexible with all condation. set your bot's ground clearance according to your arena. make sure that your motor is more inough to pic your  bots whole load and move properly. motor torque is required inough for your robot's movment. wiring details is given in wiring photo. make sure that in remot control you prefere dpdt switch.and if there is no specification and if possible you have to use more then 5A current. i think it is more inough to build your startup robot. i have attached some photos with this blog. wiring photo and robot which i made in my first compatition of robo-war robot.

above photo is my first robot.

remote and robot's internal wiring  in above photo.

thank you guys for reading this blog.